House Cleaning Ideas For Your Home | Domestic Cleaners Tips

A professional cleaner advice for your home

How to Degrease Your Stove and Oven Using Natural Materials

Keeping the stove and oven clean can be a real hassle, especially when dealing with stubborn grease. But fear not! With a few simple natural ingredients and some elbow grease, you can get your kitchen appliances sparkling clean in no time. As a former professional house cleaner turned DIY cleaning enthusiast, I’m here to share my top tips for cleaning and maintaining your stove and oven without harsh chemicals.

Gather Your Supplies

Before diving into cleaning, it’s essential to gather all the necessary supplies. Here’s what you’ll need:

  • Baking Soda: This powerhouse cleaner helps to break down grease and grime without scratching surfaces. Its alkaline properties make it the number one grease and oil stain solvent. 
  • White Vinegar: Vinegar is acidic and great for cutting through grease and deodorising.
  • Dish Soap: Opt for a mild dish soap to help lift grease from surfaces.
  • Microfibre Cloths or Sponge: These are gentle on surfaces and perfect for wiping away any oil-based residue.
  • Spray Bottle: Mix and apply your cleaning solution with a spray bottle.
  • Old Toothbrush: A toothbrush is excellent for getting into tight spaces and corners where grease can build up.
  • Rubber Gloves: Protect your hands from the cleaning solution and grease.

Once you’ve gathered your supplies, you’re ready to tackle the grease!

A frying pan with some food cooking on a stove

How To Remove The Grease From Your Stove

Start by removing any grates, burner caps, and knobs. Place them in a sink filled with hot, soapy water to soak while you clean the rest of the stove.

Next, sprinkle a generous amount of baking soda over the stovetop surface. Baking soda is a gentle abrasive that helps loosen grease and grime. Let the baking soda sit for a few minutes to work its magic.

While the baking soda sits, mix equal parts white vinegar and water in a spray bottle. Spray the vinegar solution over the baking soda-covered areas of your stove. The vinegar will react with the baking soda, creating a foaming action that helps lift grease away.

Using a microfibre cloth or sponge, scrub the stovetop surface, focusing on any areas with stubborn residue buildup. Use circular motions to work the baking soda and vinegar mixture into the grease, breaking it down and lifting it away.

Use an old toothbrush dipped in vinegar for stubborn spots or tight spaces to scrub away the grime.

Once you have thoroughly scrubbed the stovetop, use a clean, damp cloth to wipe away any remaining baking soda and vinegar residue. Rinse the cloth frequently to ensure you’re not spreading grease around.

Finally, rinse and dry the grates, burner caps, and knobs that have been soaking in hot, soapy water. Once everything is clean and dry, reassemble your stove and admire your sparkling clean appliance!

A flat frying pan on a gas stove

How To Remove Soot And Grease From Your Oven

Cleaning the oven can seem daunting, especially if you have neglected it for a while. But with the right approach, you can get your oven looking like new again!

Start by removing the oven racks and setting them aside to soak in hot, soapy water. It will help to loosen any baked-on grease and grime.

Next, make a paste using baking soda and water. The consistency should be similar to toothpaste. Spread the paste over the interior surfaces of your oven, focusing on areas with heavy grease buildup.

Once you have applied the baking soda paste, let it sit for at least 30 minutes or longer for stubborn stains and soot.

While the baking soda paste works its magic, mix equal parts white vinegar and water in a spray bottle. After the baking soda has had time to sit, spray the vinegar solution over the baking soda paste. The vinegar will react with the baking soda, causing it to foam and lift away grease and grime.

Using a damp microfibre cloth or sponge, scrub the oven surfaces, working the baking soda and vinegar mixture into any stubborn stains or grease spots. For tough, baked-on soot, you may need to use a bit of elbow grease to loosen it.

Once you’ve thoroughly scrubbed the oven interior, use a clean, damp cloth to wipe away any remaining baking soda and vinegar residue. Rinse the cloth frequently to ensure you’re not spreading grease around.

After cleaning the oven interior, rinse and dry the oven racks that have been soaking in hot, soapy water. Once everything is clean and dry, reassemble your oven and marvel at how clean it looks!

Maintaining a Clean Stove and Oven

Now that your stove and oven are sparkling clean, it’s essential to maintain them to prevent grease buildup in the future. Here are a few tips to help keep your appliances clean:

  • Wipe up spills promptly: Don’t let spills and splatters sit on the stove or oven surfaces. Wipe them up as soon as they occur to prevent them from baking on the surfaces and becoming difficult to remove.
  • Regularly clean burner grates and oven racks: Make it a habit to clean your burner grates and oven racks frequently to prevent grease buildup.
  • Use a splatter guard: When cooking greasy foods like bacon or fried chicken, use a splatter guard to prevent grease from splattering onto your stove and oven surfaces.
  • Deep clean periodically: Plan to deep-clean your stove and oven at least once a month to keep them looking their best.

By following these tips and using natural materials, you can keep your stove and oven looking clean and grease-free without harsh chemicals. So roll up your sleeves, put on your rubber gloves, and get ready to tackle that grease! Your sparkling, clean kitchen awaits!

How To Clean The Shower Cabin

The shower cabin has become a must in any modern bathroom and is very convenient because it absorbs all direct contact with water. It has many modes for comfortable bathing and can fit even in a very compact bathroom. However, the hygiene issue remains, and now we will learn more about its cleaning and preservation of the original shine even after years. 

How to protect the shower cabin from pollution 

Cleaning tips for shower cabins.

There are several requirements, compliance with which will significantly facilitate the maintenance and will prevent the accumulation of contaminants and chlorine deposits: 

Ventilation: Regular ventilation will allow excess moisture to go out of the room, so no mould and odours will form. That will also help slow down the process; 

Rinsing of foam and soap stains after use: in order not to have to use detergents often and to waste time in cleaning, rinse with the removable shower from the inside, completely removing the soap residue; 

Thorough washing: you need to clean and wash at least twice a week to remove even small leaks, and your shower cabin shines. 

Cleaning of glass coating and frosted glass 

The anti-drip film and the matte texture have a poor relationship with the mop of the steam cleaner, aggressive detergents and hard rubber coatings. The matte film also has increased sensitivity to touch. Any contact with liquid or solid substances prints on the milky white layer achieved with a special paste – even fingerprints and dried water drops look like oil stains. 

Distilled water is highly effective for cleaning these two surfaces. Its soft touch removes dirt while preserving the film (matte or anti-drip) on the surfaces without leaving stains (its consistency does not contain lime). The recommended fabric is microfibre or velvet suede, and the cleaning principle excludes strong friction. 

Degreaser is the best friend for frosted glass partitions, but only if it does not contain aggressive chemicals. Otherwise, homemade recipes are used even for the dissolution of layered stains and construction mixtures. Organic vinegar, chalk, and detergent diluted with water replace acids and abrasive particles. The main recommendation of the specialists for the maintenance of each type of glass: dry after each wetting! 

Glazed cladding, gutters and joints 

How to clean your shower cabin quickly

The aesthetic vision of the cabin is endangered by staining the glass. But insufficient regular maintenance of other details is a risk to hygiene after developing pathogenic microorganisms. The usual construction is “framed” by thin metal profiles with stainless steel coating (often chrome). 

Despite the anti-corrosion coating, regular drying, rust application, and scale protection, it is the right way to maintain. The drive elements (roller, gutters) require the utmost care when cleaning, and their drying should be noticed. 

The central concentrator of dirt is the joints of the tiles if the shower tray is covered with this type of flooring. As with any cladding, treatment with a suitable solution easily removes stains and splashes, but the joints “remember” any missed wash. 

Hot water before cleaning is a suitable means of dissolving hardened dirt, but regular attention is the safest way of hygiene. Drying after washing is mandatory for some claddings where the penetration of water swells and irreversibly damages the tiles. 

Glazed ceramics, granite or terracotta tiles with a smooth texture are the easiest to maintain. All dirt and dust particles concentrate on the surface glaze, from where we wash with a mop, steam cleaner, and a suitable solution – preferably non-abrasive, as scratches on the enamel can quickly become a “warehouse” for bacteria. 

Cleaning agents 

There are two methods: 

Chemical – the remarkable thing here is that you need to pay attention to the composition and avoid products containing alcohol, acetone or ammonia when choosing. These ingredients make part of the construction unusable, primarily if you use a cheap plastic model. In most cases, they are available in the form of pastes, creams and liquids; 

Mechanical – consists of brushes, sponges and the like to remove aggressive stains. For this situation, we do not recommend that you handle extremely hard and rough accessories that will likely ruin the appearance. 

But let’s find out what causes the pollution

First of all, this is low-quality water containing limestone and other impurities. After each bath, shampoo, and soap, foam forms and remains on the floor and walls. When we use it, hair and other small particles fall out of us, such as epithelium, and if they are not removed in time, unpleasant odours appear, and the aesthetic appearance is spoiled. 

Why drops on the glass are a problem 

Water is the leading “supplier” of limestone. Thus, the inevitable splashes on the glass part of the cabin are coloured white and look like spots. Bathroom equipment manufacturers apply a special anti-drip coating that repels dust and limescale. However, this does not mean that cleaning is unnecessary – transparency without staining is observed only for a certain period. After its expiration, the sticky layer of dust and the effect of the water jet are evident. 

Ordinary tempered glass is treated as a double-glazed window. The steam cleaner also helps with speed and quality washing. Clean water or glass cleaner – the choice is determined by the type of hygienic procedure. Daily cleaning and cleaning dried dirt and building materials require a different approach. 

It is good to clean the shower cabin with a detergent with an anti-lime effect with frequent bathing. An ordinary glass cleaner does an excellent job if the glass is not very dirty. 

An anti-scale agent in the form of a spray is another option. After spraying: 

  • wait for a few minutes
  • go with an old sponge so as not to scratch the glass
  • rinse with a shower and dry with a microfibre cloth.  

Finally, if you like, you can spray with glass cleaner and wipe with a clean and dry cloth. 

The best way to keep the cabin clean is to rinse it with water after each shower and avoid the formation of persistent deposits. Then the delicate detergents will only work from time to time and will certainly have to clean the shower cabin more efficiently. 

For the bathroom to be a safer place for the whole family, everyone should maintain its cleanliness. 

To give shine to the shower cabin, occasionally spray it with a solution of vinegar and water in a ratio of 50/50. 

A Simple Organic Recipe To Remove Mould

A great many homeowners who live in a humid climate sooner or later have to deal with mould in their houses or apartments. It may appear under the kitchen sink or the bathroom, or on your porch or terrace if they are exposed to frequent rainfalls. Their first reaction is to look for a proper detergent for the problem, but you can remove mould spots in a much more eco-friendly manner, following this easy-to-do and straightforward recipe.

All you need is one fresh lemon, white vinegar, and tap water. Cut the lemon in half and then squeeze the juice in a teacup; add an equal quantity of white vinegar. Stir them well, and then add about 250-300 ml of water. The ratio you strive for is 1:1:6 (lemon juice to vinegar to water).

You can use a sponge or a paper towel soaked in the mixture to rub it in the mould-ridden area. The acid agent of the vinegar, combined with the lemon juice, will dissolve the mould cells almost immediately. Rinse profusely with clear tap water and wait until the place dries out. If necessary, repeat the procedure once or twice.

The whole treatment – making the recipe and removing the mould – rarely requires more than 10-15 minutes.